Pilot operated hydraulic pressure control valve-Cartridge type. An oil filled cylinder which serves as cushion is situated in the flux path between connecting rod and slide.
Three phase disc brake asynchronous motor is a full-closed and self cooling axial magnetic field novel motor,and its stator and rotor are in disc shape. Therein,the rotor is euipped with disc-shaped stop ring.
Services

Hydraulic Overload Protection System

Pilot operated hydraulic pressure control valve-Cartridge type. An oil filled cylinder which serves as cushion is situated in the flux path between connecting rod and slide. The cylinder is preload with hydraulic pressure.At each operating stroke the hydraulic pressure increases but remains below the set cut off pressure.In an overload situation the cut off pressure is reached causing the valve to open. The hydraulic pressure breaks down immediately (3/1000) and release the slide from the mechanical load.


 

  • For single crank presses

 

Upto 200 Tons. Presses

 

Model:OLS 16 – 1:1.6/50

Model:OLS 16 – 1:2/36

 

Upto 600 Tons. Presses

 

Model : OLS 25 – 1:1.6/ 50

Model : OLS 25 – 1:2/ 36

 

Upto 2000 Tons. Presses

 

Model : OLS 40 - 1:1.6/36

Model : OLS 40 -1:2/36

Hydraulic Jam Release / Locking unit.

For High speed and Knuckle Joint Presses.


 

  • For single crank presses

  • For double crank presses

 

Hydraulic Jam Release / Locking unit For High speed / Knuckle Joint Presses.

 

Model: SHTL – 80/10

Model: SHTL – 80/12

Overload Protector - Sandsun - Taiwan

 

Function

 

  • Overload protector is equipped in Press machine to check hydraulic pressure of cylinder inside the slider.

  • If happen overload, the hydraulic pressure of cylinder will be released immediately within3/1000 seconds.

  • When happen overload,in order to protect the press and die,the press will stop working after receiving the signal from limit switch.

  • After happen overload,the air will drive hydraulic pump to supply normal working pressure immediately and the press van work normally.

  • It has pressure control valve inside of overload protector, which can adjust hydraulic pressure automatically and eliminate the impact of rising pressure (which cause by oil temperature rise) in pressing process.

  • May select different types of components and control units base on the different types and specifications of press machine.

  • Use the air driven hydraulic pump. Once the outlet hydraulic pressure reaches the setting pressure,it will stop driving which won't waste any energy. Or,it will add the pressure automatically if the outlet pressure is reducing. It consists of the function to keep the pressure continuously.

  • The circuit control system has the function of check. If there is no pneumatic pressure,the hydraulic pressure will still keep.

  • It has the function of inspection.It can be connected with the machine.

  • Suggest to adopt Model PC12 Pump when using Model CA & CB=16 or 25 Clamp.

 

Model: VA/VS 08 – 560/760/960

 

Model: VA/VS 12 – 560/760/960

 

Model: PB08-1P1V / 1P2V / 1P3V

Top Air - Taiwan

The TOPiC series DVX features a built-in dynamic failure detection system that is self checking on every cycle and interrupts pilot supply air when a failure occurs without reliance on a spool or stem actuated sensor. Additionally the monitor system is located with the main valve body, making it virtually tamper resistant.

 

VALVE ENERGIZED

 

The DVX is designed to provide full outlet pressure only when both valve elements are operated. Inlet passages provides supply air between the two inlet elements. If only one element operates, or if one is stuck in the operated position, the air will exhaust to the atmosphere .

 

Model: DVX15 - G ½" / G ¾"

Top Air - Taiwan

The TOPiC series DVX features a built-in dynamic failure detection system that is self checking on every cycle and interrupts pilot supply air when a failure occurs without reliance on a spool or stem actuated sensor. Additionally the monitor system is located with the main valve body, making it virtually tamper resistant.

 

VALVE ENERGIZED

 

The DVX is designed to provide full outlet pressure only when both valve elements are operated. Inlet passages provides supply air between the two inlet elements. If only one element operates, or if one is stuck in the operated position, the air will exhaust to the atmosphere .

 

Model: DVX20 - G 1" / G ¾"

Top Air - Taiwan

The TOPiC series DVX features a built-in dynamic failure detection system that is self checking on every cycle and interrupts pilot supply air when a failure occurs without reliance on a spool or stem actuated sensor. Additionally the monitor system is located with the main valve body, making it virtually tamper resistant.

 

VALVE ENERGIZED

 

The DVX is designed to provide full outlet pressure only when both valve elements are operated. Inlet passages provides supply air between the two inlet elements. If only one element operates, or if one is stuck in the operated position, the air will exhaust to the atmosphere .

 

Model: DVX40 - G 1 ¼" / G 1 ½"

Toyooki - Japan

This valve popular used to control combined clutch and brake for small,medium and even high-speed mechanical presses,serves to bring full performance of air clutch and brake.

 

It also best applies to seperate clutch and brake for large size press as well as three-dimensional transfer mechanical presses. There are M2 series complete with micro switch an

 

Model: AD - SL231D(E) - 710D ~ 916D - M3 - D

Toyooki - Japan

This valve popular used to control combined clutch and brake for small,medium and even high-speed mechanical presses,serves to bring full performance of air clutch and brake.

 

It also best applies to seperate clutch and brake for large size press as well as three-dimensional transfer mechanical presses. There are M2 series complete with micro switch an

 

Model: AD - SL231D(E) - 303D ~ 508D - M2 - D

Toyooki - Japan

This valve popular used to control combined clutch and brake for small,medium and even high-speed mechanical presses,serves to bring full performance of air clutch and brake.

 

It also best applies to seperate clutch and brake for large size press as well as three-dimensional transfer mechanical presses. There are M2 series complete with micro switch an

 

Model: G 1" / G 1 ¼" / G 1 ½" / G 2"

Slide Adjustment Break Motor - Beijing Fute Disc Motor

Three phase disc brake asynchronous motor is a full-closed and self cooling axial magnetic field novel motor,and its stator and rotor are in disc shape. Therein,the rotor is euipped with disc-shaped stop ring. The product features advanced technical performance,novel structure,small size,short axial length,large brake torque,rapid brake,accurate positioning,convenient application,and easy maintenance,and it has the function of running normally after power-on,and stopping immediately in the event of power-off. In addition ,its brake pad is made of non-asbestos friction material , and so there is no need of adjustment before the brake times hit the number 100,00. At auxiliary drive, metal-forming machine , and construction cradle elevator etc.

 

The company's three-phase disc brake asynchronous motor mainly falls into three collections,namely,YPE,YHHP,and YHHPY,and motors of such three collections are full-closed and self-cooling axial magnetic field novel motor,with stator and rotor in disc shape. Therein,the stator and rotor are made of steel strip and produced by advanced punch-roll equipment that was imported from Switzerland.

 

Applicable scope:

 

The three- phase disc brake asynchronous motor is in line with KB/Y6222-2007 disc brake asynchronous motor standard and JB5317-2007 electric chain hoist motor standard , and its power is 0.1-5.0Kw , voltage,220/380 – 440V , frequency, 50/60Hz,protection level,IP54, and insulation grade above Grade B.

 

YPE motor is mainly applied in such industries as metal-forming machine and construction cradle,etc,and on its case there is clutch device,thus it has favorable releasing function. In addition,its work system falls into S1 and S2.

 

YHHP motor is mainly used in electric chain hoist,and it is the optimal supporting product for the hoisting industry and construction industry.Its work system is S4.

 

YHHPY motor is mainly designed for travel positioning system,and it is the optimal support product for the machinery industry like crane. Its work system is S4.

 

Model:
              YPE - 200 S2 4Z 415V / 50Hz
              YPE - 400 S2 4Z 415V / 50Hz
              YPE - 750 S2 4Z 415V / 50Hz
              YPE - 1500 S2 4Z 415V / 50Hz
              YPE - 2200 S2 4Z 415V / 50Hz
              YPE - 3700 S2 4Z 415V / 50Hz
             

Shut Height Indicator

  • An-Hyup Control Counter is the steady seller that produced with long term experience with many records of performance.

  • AHC slide counters performing the numerical control, protection molds, shortening mold replacing time, and enhanced the safety level.

  • The slide counters have high durability and taking the one-touch method enabling easy setting of up/down limits, so it can maximize the efficiency.

Optional Specifications

S: Rotate by transmitting with the transmission axis.

F: Rotate by transmitting with the steel cable wire

L: Number increase if the rotation is counterclockwise.

R: Number increase if the rotation is clockwise.

1: Rotating the axis by one turn is indicated by 0.1mm

2: Rotating the axis by one turn is indicated by 1.0 mm

 

Its main characteristics

 

  • Direction of rotation and upper and lower limits can be specified.

  • The highest number of rotation of the stalk is:1-2000 RPM;2-200 RPM

  • MICRO SWITCH capacity AC250 V/15A

  • Vibrational tolerance :30 G

  • Standard appearances : roast paint color.

 

Model:
              SDH - 45 SL / R
              SDH - 120 SL / R
              SDH - 140 SL / R
              SDH - 190 SL / R
             

Rotary Cam Boxes

 

RS series of rotary cam switch is developed to meet the requirement of production machinery to control orderly with simplistic,low pricing,and high safety. There are two types: contact point & non-contact point depending on the way of application.

Features

  • Use of micro-switch or proximity or proximity switch features of impact-proof and shock-proof.

  • Outside shell is made of iron plate under welding and plating,paint baking. Easy to install & convenient for use.

  • Action cam consists of two pieces of 180 cams, and the angle & time of action can be preset at free will.

  • Adjust the position according to the graduation,one time for completion with accurate action. The angle of pitch for each cam is 3.

  • During high speed turning, cam , micro- switch or Proximity switch has equipped with high safety and wear-proof.

  • Outside cover is designed with both side opening fir big space to make more convenient for wiring and adjustment.

  • With protective cover to prevent disorder wires,short circuit, and electric leakage to increase the safety.

  • Reasonable price.

  • Can be added with travel angle indicator.

  • With dual-head driving shaft,it can use with series units.

 

Model: RC - 4/6/8/10/12/16

WET CLUTCHES - OMPI - ITALY

Multidisc series with bronze sintered discs vs hard steel counterdiscs. Great overall compactness and top performance in terms of single stroke at higher speeds. This series also has great heat dissipation capacity due to the possibility of forced cooling of the oil by air or water. We can possibly supply devices for soft engagement and braking. Torques avilable to 400000 Nm.

 

WET CLUTCHES - OMPI - ITALY

Derived from the WO series but with the central piston actuated by air instead of oil. This series can be used when it is not convenient to use a complex hydraulic system to actuate and control the oil piston. No devices are needed for the soft braking and engagement. Torques avilable to 49900 Nm.

 

DRY CLUTCHES - OMPI - ITALY

KB: It is traditional series,historical for the company,today still the most sold,extremely popular being sold by the the thousands all, around the world at an inexpensive price. All the body parts from cast iron. Available in the monodisc version only(one disc on the brake side and one disc on the clutch side). Torque capacities from 1220 nm to 128000 nm.

 

HT: It represents the first evolution of the KB series. With the same OD there are higher torque values available, both on the clutch and brake side. The body parts are made in ductile iron and aluminum alloy. A wide and higher range of torque values are available( from .1220 Nm to 128000 Nm).

 

Rotary unions

Rotary unions for air and and hydraulic oil to be mounted together with the cluches. Flows from 1/8" to 2".

 

Heypac pumps

The Safety System is a double acting,free piston,compressed air driven hydraulic pump of infinitely variable delivery for general use pump will cycle automatically according to conditions with minimal energy consumption. The output flow and pressure depend upon the intensification ratio relative to the air supply pressure and volume.

 

The air operated fluids pumps and hydraulic power packs are currently available with fluid to air pressure ratios from 2:5:1 to 80:1.

All models employ similar air drives with only the fluid end varying in size to produce the different pressure intensification ratios. Key areas of the pumps construction and operation are described below.

 

Model:
              KR - 02/05/10/20/40/80
              GX - 10/20/40/60/80
             

Komori Safety Device - Japan

 

  • 20mm beam pitch , 8-75 optical axis, 140-1480 detection hight available.

  • 10type line up.

  • No blind area on one side.

  • 28×30mm conpact body

  • Operating temperuture range -10 to 55℃.

  • Responce time (Sensor+Controlbox) 20-30msec.

  • Protection rate IP65

  • Built in Self-check Circuit included.

  • TA376Authorized by Japanese Ministry of Health ,Labor and Welfare,

  • Type2 Authorisation of TUV.

 

Auto cell

 

Digital tonnage display for accuracy.

 

Automatic update on each stroke.

 

Automatic shut-off after 5 minutes idle.

 

Automatic zero adjustment.

 

Built-in circuits assure correct balance.

 

Load controller

 

Independent left& right, high & low setpoint.

 

Displays tonnage & deviation from benchmark.

 

Automatic set points based ib benchmark tonnage.

 

Press overload protection at all the times.

 

RS485/232 serial port.

 

Load controller

 

Excellent electrical noise rejection.

 

Automatic set point.

 

High and low setpoint display switch.

 

One or two sensor inputs.

 

Analog output jacks.

 

Geon Load Meter

Using the punch oil chamber,count up the impact of the tonnage punch.Single channel.

Load upper and lower limit setting and monitoring function.

 

Model: LMS200 PRESS LOAD METER

Geon Load Meter

Using the punch oil chamber,count up the impact of the tonnage punch.

Two point off-axis Overload Protection.

Load upper and lower limit setting and monitoring function.

Left and right balance load setting and monitoring function.

 

LMS500 PRESS LOAD METER

Geon Load Meter

Using the punch oil chamber,count up the impact of the tonnage punch.

Intergration of with themodule type.

 

LMS700 PRESS LOAD METER

Geon Load Meter

SSB100 Injection Molding Machine Clamper Controller.